www.mapeng.net 马棚网
problem || 初值问题
initial velocity || 初速
initial vertex || 初始顶点
initial viscosity || 初黏度
initial yield surface || 初始屈服面
initialing constraint || 初始约束条件
initialization || 恢复，清除，初始化
initialize || 初始化，起始设定
initiate || ①开始，创始②起燃，起爆，发动
initiating || 启动
initiating trigger || 启动触发器
initiation || 开始，创始，发生，起燃，起爆
initiation reaction || 引发反应
initiative || 首创精神，主动
initiator || ①引发剂，起爆剂，起始剂②起始因子，启动器③启动站
initiator of polymerization || 聚合引发剂
initiator program || 启动程序
injected laser || 注入式激光器
injected plasma || 注入等离子体
injection || ①射人②发射③注射，注入④注射液⑤进入轨道，入轨
injection blow molding || 注射吹塑
injection blow moulding || 注射吹塑
injection casting || ①压铸②压铸件
injection circuit || 注入电路
injection compression molding || 注射圧塑
injection cross-section || 注入横截面
injection cross-section station || 注入横截面部位
injection current || 注人电流
injection cylinder || 压射缸(压铸)
injection efficiency || 注人效率
injection fibre || 注入光纤
injection grid || 注入栅
injection laser || 注入型激光器
injection layer || 注入层
injection level || 注人水平
injection locking || 注入锁定
injection luminescence || 注入发光
injection luminescent diode || 注入式发光二极管
injection metallurgy || 喷射冶金学
injection molding || 注塑，射出成形
injection molding cycle || 注塑周期
injection molding die || 注塑模具
injection molding machine || 注塑机
injection molding machine with extension nozzle || 延长嘴式注塑机
injection mould || 注塑模
injection moulding || ①注压(硫化)法②塑料注射模(型)法，塑料注射成型
injection moulding pressure || 注射模制压力
injection nozzle || 注射嘴
injection of carrier || 载流子注入
injection pipe || 喷射管
injection plunger || 注射活柱，注射柱塞
injection pressure || 注塑圧力
injection process || 注射法(脱硫，增碳，孕育等)
injection pump || 喷油泵
injection ram || 压射柱塞
injection rate || 注入率
injection ratio || 注入比
injection speed || 注塑速度
injection unit || 注射装置
injection-moulding machine || 压注机
injective module || 内射模
injector || ①喷射器②注射器③注射极
injector nozzle || 喷油器喷嘴
injector pump || 注射泵
injectron || 高压转换管
ink || ①墨水②印色③油墨
ink jet printer || 喷墨印刷机
inker || 墨滚(印刷)
inkiness || 漆黑
inking || 划墨线，着墨，注墨水，墨迹作图
inkjet plain paper facsimiles || 喷墨普通纸传真机
inkpad || 印泥
inlaid || ①镶嵌，镶嵌的②镶嵌板的
inlaid linoleum || 镶嵌油毡
inlaid wood || 镶嵌木
inlay || ①镶入，嵌入，镶嵌②插入物
inlay busher || 嵌入衬套
inlay clad plate || 双金属板(单面式双面复层的)
inlay print || 镶人印刷
inlet || ①入口，进口②引入，注入③插入物，镶嵌物
inlet & outlet connectors || 进出接口
inlet check valve || 进油单向阀
inlet checker || 进口砖格
inlet filter || (减压器的)过滤器
inlet port || ①进(气)口②吸油口
inlet stroke || 进气行程
inlet system |
www.mapeng.net 马棚网
