Solidworks Training | Free Solidworks | Solidworks Classes | mechanical engineering

发布日期:[12-11-02 22:43:32] 浏览人次:[]

You can generate drawings in SolidWorks the same way you would generate them in 2D drafting and drawing systems. However, creating 3D models and generating drawings from the model have many advantages; for example:

  • Designing models is faster than drawing lines.

  • SolidWorks creates drawings from models, so the process is efficient.

  • You can review models in 3D and check for correct geometry and design issues before generating drawings,   so the drawings are more likely to be free of design errors.

  • You can insert dimensions and annotations from model sketches and features into drawings automatically, so you do not have to create them manually in drawings.

  • Parameters and relations of models are retained in drawings, so drawings reflect the design intent of the model.

  • Changes in models or in drawings are reflected in their related documents, so making changes is easier and drawings are more accurate.

Here some exercises are given below with description. Try it.

Automotive Brackets:

01-drum_with_mounting - axle bracket

Automotive brackets come in all shapes and sizes for all types of uses. These axle brackets made up of malleable cast iron. These brackets features machined bores, bosses and mounting faces. The brackets are slotted through one mounting hole, allowing the bracket to be positioned laterally before being clamped by tightening the bolt through the slotted side. Here the front axle is installed between the left and right wheel. It have the function which transfers the power of engine to the wheels. Especially it transfers the high power to the front wheels when driving four wheel.

Axle Bracket or Spindle Bracket or Shaft Bracket:

01-cast_iron_bracket - shaft bracket - spindle bracket

The spindle shaft is the essential element for transmitting power in mills and workshops. An axle is a stationary shaft on which pulleys and other members rotate. The part of the shaft within the bearing is known as journal. A spindle is a machine shaft that drives and supports either a cutting tool or the work on which machining and other operations are performed.

Sliding Frame:

01-sliding_frame - steel frame

A sliding frame is an extremely efficient extraction system that allows non free flowing materials to be discharged from the flat bottom. The sliding frame is a simple machine consisting of either one or two hydraulic cylinders driving a frame that reciprocates across the floor. These sliding frames which are used in automobiles, power plants and lathe machineries etc. Here the conventional pressed steel frame to which all the mechanical units are attached and on which the body is superimposed.

Slotted Block or Clapper Block:

01-slotted_block - clapper block - clapper box

This clapper block which used in shaper, planer and slotting machines. The clapper easily swings up. It flops back down with a slight push. The clapper box hinges a tool block already fitted with apron. The tool block holds a tool post to mount the tool. During cutting stroke, the tool block fits inside the clapper box rigidly. During the return stroke, the tool block lifts out of clapper to

|<< << < 1 2 > >> >>|
www.mapeng.net 马棚网
www.mapeng.net
文章作者:未知 | 文章来源:mechanicalengineeringblog | 责任编辑:intoner | 发送至邮箱: | 加入收藏:
本文所属专题:Solidworks 
相关资讯
热点资讯
推荐资讯

关于我们 | 站点导航 | 使用帮助 | 友情链接 | 广告服务 | 免责声明 | 新手上路
设为首页 | 加入收藏 | 在线留言 | 马棚网QQ群:{92562572}{102901272}{333259257} | 交流QQ: 客户服务 客户服务 客户服务